Product Category menu

Amperometric Chlorine Sensor MCC1 - Made in Germany

Product Detail Information

Chlorine Sensor CC1

Chlorine sensor with membrane-covered, amperometric 3-electrode system. For the measurement of free chlorine with greatly reduced pH dependence, also in seawater.

Product description:
• Measurement: NaOCl (sodium hypochlorite), Ca(OCl)2 (calcium hypochlorite), Cl2 (chlorine gas), electrolytically generated chlorine, and organic combined chlorine based on iso-cyanuric acid (tested up to an iso-cyanuric acid concentration of 500 mg/l),
• Calibration: at the controller, via analytical chlorine determination by DPD 1 method. Observe the iso-cyanuric acid concentration when determining the free chlorine.
• Interferences: ClO2 is 100 % detected, O3 is detected,
• pH range: 4 ... 12, greatly reduced pH dependence,
• Pressure range: 0 ... 0.5 bar, no pressure surges and/or fluctuations,
• Temperature range: 5 ... 45 °C,
• Integrated automatic temperature compensation,
• Response time: T90 approx. 2 min.,
• Flow rate: approx. 30 l/h, low flow dependence,
• Shaft length: standard 175 mm, mA version 220 mm,
• Material: PVC-U, PEEK, stainless steel 1.4571, microporous hydrophilic membrane

Areas of application:
• Fresh water and seawater; surfactants are tolerated in part; a special electrolyte is used for seawater 

Scope of supply:
• CC1: sensor, membrane cap, electrolyte for use in fresh water use