Product Category menu

Amperometric Peracetic Acid Sensor MP10

Product Detail Information

Peracetic Acid Sensor P10

Sensor for the measurement of peracetic acid - surfactants and leads are tolerated.

Product description:
• Measurement: Peracetic acid,
• Calibration: at the controller, via analytical determination by DPD-method
• Interferences:
- ClO2 is registered with factor 1 of its measuring value
- H2O2 does not interfere
- O3 is registered with factor 2500 of its measuring value
• pH range: 1 ... 6,
• Pressure range: 0 ... 1 bar, no pressure surges and/or fluctuations,
• Temperature range: 0 ... 45 °C,
• Sensor with automatic temperature compensation,
• Response time: T90 approx. 1.5 - 5 min, depending on type and temperature
• Flow rate: approx. 30 - 100 l/h, low flow-dependence,
• Shaft length: 175 mm, 195 mm, 205 mm, mA-Version 220 mm,
• Material: PVC-U, stainless steel 1.4571

Areas of application:
• Fresh water, all types of water treatment
• Lead acids: up to 1% sulfur, saltpetre and phosphoric acid have no influence on the measuring results
• Surfactants are tolerated 

Scope of supply:
• P10: sensor, membrane cap, electrolyte